CompTIA certified sk0-002 study guides with sk0-002 exam training materials
03.10.2010 by admin - 0 CommentPosted in CompTIA
| Pass1000 provide of sk0-002 CompTIA SERVER+ EXAM 2004 Objectives sk0-002 preparatory materials is products such as latest (sk0-002 Exam)CompTIA pdf Braindumps(Printable Version).Pass1000 successful Guide students to pass any IT certification. Provide latest certification information of IT Exam .Self-learning is a big problem,The need for expert guidance. So pass1000 will introduction exam service providers to better help all engineers to obtain the corresponding CompTIA certification. |
 |
| Pass1000 professional provides IT Certification informations. As our website are guarantee results and our products 100% pass rate. If you want to pass CompTIA certification SERVER+ to sk0-002 exam(CompTIA SERVER+ EXAM 2004 Objectives),These certifications are not easy to attain as they require professionalism and a complete dedication towards the study. More over these exams are now continuously updating and accepting this challenge is itself a task. About sk0-002 braindumps exam is an important part of CompTIA certifications and at CompTIA SERVER+ EXAM 2004 Objectives SERVER+ sk0-002 braindumps ourexam have the resources to prepare you for this.Core part of sk0-002 certifications and once you clear the exam you will be able to solve the real time problems yourself. |
|
| Pass1000 provide ourexam & ourexam exam topics of sk0-002 Reference,For example: Here are some Questions&Answers, if you want to see all of the DEMO(Exam topics), you can visit the official website of ourexam.com |
 |
| CompTIA certification sk0-002 Introduction: CompTIA SERVER+ EXAM 2004 Objectives Overview Exam topics 1. Which three should be documented after upgrading a SCSI RAID controller? (Select THREE) A. disk utilization B. installation date C. adapter baselines D. location slot of the RAID controller E. status of the adapter card installation F. RAID controller information (warranty, specifications etc.) Answer: BDF 3. Which of the following is the functional description of a server connected between two separate IP subnets? A. server as a bridge B. server as a router C. server as a switch D. server as a data link Answer: B 4. A company plans to upgrade a network server. Before proceeding with the upgrade, the HCL (Hardware Compatibility List) and hardware is checked and necessary backups and documentation are made. The existing 512 MB of SDRAM is replaced with 1024 MB. The 10 Mbps network card is replaced with a 10/100 PCI network card. When the server restarts, beeps sound and the server does not pass the POST. Which of the following is the MOST likely cause of the problem? A. The memory is not seated correctly. B. The network card is not configured correctly. C. The server does not support 1024 MB of memory. D. Master SDRAM ECC needs to be enabled in the CMOS. Answer:A 5. The latest SCSI adaptor card is purchased from a vendor. Drivers for the operating system cannot be obtained. The SCSI adapter card is added to an existing server. Upon booting, the operating system does not detect the card. Which of the following is the MOST likely cause of the problem? A. The SCSI card is not seated correctly. B. The termination is incorrectly set on the SCSI card. C. The SCSI card is not listed on the operating system HCL (Hardware Compatibility List). D. Operating system patches were not updated before installing the card. Answer: C 6. After upgrading the SNMP (Simple Network Management Protocol) protocol, the _____ can be looked up. It is a sequence of integers that uniquely identifies a path to a managed object. A. MIB (Management Information Base) B. OID (ObjectIDentifier) C. register D. community name Answer: B 7. A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server, the technician discovers that the operating system does not detect the drive. After rebooting the server, the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next? A. backup the BIOS configuration to use later B. install the BIOS update from a command prompt C. create a bootable floppy and copy the BIOS update tools to the floppy D. read the manufacturer’s guidelines and recommendations on installing the update Answer: D |
| CompTIA(sk0-002) belongs to one of the SERVER+ certified test, if needs to obtain the SERVER+ certificate, you also need to participate in other related test, the details you may visit the sk0-002 certified topic, in there, you will see all related SERVER+ certified subject of examination. |
 |
| CompTIA University delivers a blended-learning program.Pass1000 offer over 1000 product and solution courses, virtual labs, instructor-led training and various assessment tests and exams to assist ourexam in their training needs. |
